Giải pháp
100 giải pháp sẵn sàng triển khai trong mười lĩnh vực, mỗi giải pháp gồm bài toán, lộ trình giao thức, dòng sản phẩm đề xuất và danh sách kiểm tra cho quản lý dự án.
100 giải pháp
01Smart Building
S01–S10S01
Building Management System Integration
Chillers, AHUs, meters, lighting and lifts arrive with different protocols from different vendors, so the BMS only sees the subsystems someone paid to integrate and every new package needs another custom driver.
Tìm hiểu thêm →S02
HVAC Central Monitoring
AHUs, fan coils, VAV boxes, chillers, pumps and cooling towers are monitored on separate panels, so operators find faults by complaint rather than by alarm.
Tìm hiểu thêm →S03
Chiller Plant Optimization
Chillers, chilled and condenser water pumps and cooling towers run on fixed schedules with no measured cooling output, so nobody can tell how efficiently the plant performs or where to start optimising.
Tìm hiểu thêm →S04
AHU Smart Control
Old AHU controllers cannot vary fan speed or fresh air by CO2, and replacing them with a proprietary controller locks the building into one vendor.
Tìm hiểu thêm →S05
Indoor Air Quality Monitoring
Occupants and certification schemes ask for CO2, PM2.5, TVOC and humidity data, but there are no sensors on the BMS, and cabling every floor for them is costly in an occupied building.
Tìm hiểu thêm →S06
Smart Lighting Integration
KNX, DALI and Modbus lighting systems each have their own software, so the BMS cannot schedule lighting, see failures or link lighting to occupancy.
Tìm hiểu thêm →S07
Building Energy Monitoring
Electricity, water, gas and BTU meters are read by hand or not at all, so energy reports are late, incomplete and impossible to trace back to a system or floor.
Tìm hiểu thêm →S08
Elevator & Escalator Monitoring
Lift and escalator status sits in the vendor’s own system, so the control room learns about a trapped passenger or a stopped escalator by phone.
Tìm hiểu thêm →S09
Multi-system BMS Gateway
HVAC, lighting, access control, energy and fire systems each report to a different workstation, and operators cannot correlate an event across them.
Tìm hiểu thêm →S10
Building Command Center
Facility teams run several buildings from spreadsheets and vendor portals, with no common dashboard, alarm list or API for the tenant and management systems.
Tìm hiểu thêm →
02Energy & Power
S11–S20S11
Smart Electricity Metering
Hundreds of electricity meters from several brands are spread across panels and sites, read monthly by hand, with no interval data for demand analysis.
Tìm hiểu thêm →S12
Multi-Utility Metering
Water, electricity, gas and heating/cooling meters use different protocols and are managed by different teams, so there is no single consumption record per building or tenant.
Tìm hiểu thêm →S13
Energy Management System (EMS)
Energy data exists in meters and the BMS but nobody turns it into daily, monthly and tariff-period reports, so savings measures cannot be verified.
Tìm hiểu thêm →S14
Solar PV Monitoring
Rooftop and carpark PV systems use inverters from several brands, each with its own cloud, so the owner cannot compare yield against irradiance or spot an underperforming string in one place.
Tìm hiểu thêm →S15
Battery Energy Storage Monitoring (BESS)
The battery BMS, PCS, meters and container HVAC report separately, so the operator has no combined view of state of charge, cell temperature and cooling when an alarm occurs.
Tìm hiểu thêm →S16
EV Charging Station Integration
Chargers added to a car park can overload the building supply, yet the BMS and energy system have no visibility of charging power or charger faults.
Tìm hiểu thêm →S17
Power Quality Monitoring
Unexplained trips, harmonics and voltage dips damage equipment, but the analysers that could explain them are only read locally after the event.
Tìm hiểu thêm →S18
UPS & Generator Monitoring
Standby power is only tested monthly, and a UPS on bypass or a generator with low fuel is discovered when the mains fails.
Tìm hiểu thêm →S19
Substation Protocol Gateway
Private substations must report to the utility over IEC 104 or IEC 61850, but the installed meters and relays only speak Modbus, and a full substation automation upgrade is out of budget.
Tìm hiểu thêm →S20
Carbon & Energy Dashboard
Sustainability reports are compiled once a year from invoices, so management cannot see progress toward carbon targets or which site is driving emissions.
Tìm hiểu thêm →
03Data Center
S21–S30S21
DCIM Data Integration
The DCIM has an SNMP interface, but half of the power and cooling plant speaks Modbus or BACnet, so its dashboards are incomplete and capacity planning relies on estimates.
Tìm hiểu thêm →S22
UPS Monitoring
UPS units from different generations report over SNMP or Modbus to separate consoles, so load, autonomy and battery alarms are not seen together by the BMS or cloud.
Tìm hiểu thêm →S23
PDU Monitoring
Rack power is estimated from nameplates, so some racks run close to breaker limits while others are stranded capacity, and customers cannot be billed per rack.
Tìm hiểu thêm →S24
CRAC/CRAH Monitoring
Precision air conditioners alarm locally on their own display, so a failed compressor or a high-pressure trip is noticed only when hall temperature rises.
Tìm hiểu thêm →S25
Data Center Cooling Monitoring
Chillers, pumps, cooling towers and CRAH units are controlled by different contractors, so the operator cannot see the whole cooling chain or measure how much energy cooling uses.
Tìm hiểu thêm →S26
Rack Environment Monitoring
Room sensors show an average temperature while individual racks overheat, and open doors or smoke inside a cabinet are not reported at all.
Tìm hiểu thêm →S27
Water Leakage Monitoring
Leaks under raised floors from CRAC units, chilled water pipes or humidifiers go unseen until equipment is wet, because the leak panel only sounds a local buzzer.
Tìm hiểu thêm →S28
UPS Battery Monitoring
One weak cell can shorten backup time for a whole string, but battery monitors are read only during the annual service visit.
Tìm hiểu thêm →S29
Generator & ATS Monitoring
Generator controllers and transfer switches are checked on weekly walk-rounds, so a failed start, a switch stuck on one source or low fuel is found too late.
Tìm hiểu thêm →S30
Data Center Unified Alarm Platform
Power, cooling, security and IT alarms arrive through SNMP traps, BMS pop-ups and vendor emails, so the on-call engineer misses the one alarm that matters in the noise.
Tìm hiểu thêm →
04Industrial & Manufacturing
S31–S40S31
PLC Multi-Protocol Gateway
Siemens, Schneider, Mitsubishi and Rockwell PLCs on the same site cannot exchange data without extra programming in each controller, and every interlock between lines becomes a project.
Tìm hiểu thêm →S32
Modbus to OPC UA Gateway
The MES and historian expect OPC UA, but meters, drives and small controllers only offer Modbus registers without names, units or scaling.
Tìm hiểu thêm →S33
PLC to MQTT Gateway
Headquarters wants production data from every plant in the cloud, but opening PLC networks to the internet is not acceptable to the plant’s IT and safety teams.
Tìm hiểu thêm →S34
Legacy Equipment Connectivity
Machines and instruments with RS-232 or RS-485 ports still run well but are invisible to modern systems, and replacing them only for connectivity is hard to justify.
Tìm hiểu thêm →S35
Factory Equipment Monitoring
Supervisors learn that a machine has stopped by walking the floor, and stoppage causes are written on paper at the end of the shift.
Tìm hiểu thêm →S36
OEE Data Acquisition
OEE is calculated from manual logs, so availability, performance and quality figures are disputed and improvement projects start from guesswork.
Tìm hiểu thêm →S37
Predictive Maintenance Data Gateway
Maintenance wants vibration, temperature and current trends to plan work, but the data sits in drives and sensors that nobody logs, so failures still arrive as surprises.
Tìm hiểu thêm →S38
Compressed Air Monitoring
Compressors run on local pressure switches, leaks and idle running go unnoticed, and nobody knows the energy cost of a cubic metre of compressed air.
Tìm hiểu thêm →S39
Boiler & Steam Monitoring
Boiler efficiency, steam flow and condensate return are recorded by hand in the boiler house, so fuel waste and steam losses stay hidden between inspections.
Tìm hiểu thêm →S40
Factory Energy Management
Energy is the largest variable cost after materials, but it is only known per month from the utility bill, never per line, shift or product.
Tìm hiểu thêm →
05Water & Environmental
S41–S50S41
Water Pump Station Monitoring
Pump stations are spread across the network and visited on rounds, so a tripped pump, a high level or a power failure is reported by residents before the operator knows.
Tìm hiểu thêm →S42
Water Treatment Plant Monitoring
Treatment stages were automated at different times by different contractors, so filters, dosing and clear-water tanks sit on separate PLCs and SCADA screens.
Tìm hiểu thêm →S43
Wastewater Treatment Monitoring
Aeration blowers use most of the plant’s energy, yet dissolved oxygen, blower power and effluent quality are logged separately, so the plant cannot show compliance and efficiency together.
Tìm hiểu thêm →S44
Smart Water Metering
Water meters in basements and shafts are read by hand or estimated, causing billing disputes and hiding leaks until the bill arrives.
Tìm hiểu thêm →S45
Water Pressure Monitoring
Low pressure complaints and pipe bursts point to pressure problems, but the network has few pressure points and none are reported in real time.
Tìm hiểu thêm →S46
Water Network Leakage Detection
Non-revenue water is high but nobody can say in which district it is lost, because inflow meters and night-flow data are not collected per zone.
Tìm hiểu thêm →S47
Tank & Reservoir Monitoring
Roof tanks and reservoirs overflow or run dry because level switches only drive the local pump, and nobody is alerted until occupants complain.
Tìm hiểu thêm →S48
Water Quality Monitoring
pH, turbidity and chlorine are checked by grab samples, so a quality event between samples is found late and records for the regulator are incomplete.
Tìm hiểu thêm →S49
Flood & Drainage Monitoring
Low points, underpasses and drainage pumps are checked by patrol during storms, so flooding is reported by the public before crews are dispatched.
Tìm hiểu thêm →S50
Remote Water Telemetry Gateway
Hundreds of small remote assets (wells, valves, booster sets) have no fixed network, and a proprietary RTU per site is expensive to buy and maintain.
Tìm hiểu thêm →
06Smart City & Municipal
S51–S60S51
Smart Street Lighting
Street lighting cabinets switch on timers or photocells, failed lamps are found by patrols, and energy is billed on estimates rather than measurement.
Tìm hiểu thêm →S52
Urban Environmental Monitoring
Air quality, noise and weather stations come from different suppliers with separate portals, so the city cannot publish one consistent picture to residents.
Tìm hiểu thêm →S53
Public Building Energy Monitoring
A municipality owns dozens of schools, offices and halls with different meters and no common reporting, so energy targets cannot be tracked per building.
Tìm hiểu thêm →S54
District Cooling Monitoring
The district cooling plant must bill each customer building by energy delivered, but BTU meters in energy transfer stations are read by hand and supply temperatures are not tracked.
Tìm hiểu thêm →S55
Smart Waste Monitoring
Collection trucks empty bins on fixed routes, so some bins overflow while others are collected half empty, and compactors fail without warning.
Tìm hiểu thêm →S56
Smart Parking Integration
Car parks run their own guidance and barrier systems, so the city cannot show live space availability across sites or link parking with EV charging.
Tìm hiểu thêm →S57
Smart Public Toilet Monitoring
Cleaning follows a fixed timetable regardless of use, odour and supply shortages lead to complaints, and water leaks run unnoticed overnight.
Tìm hiểu thêm →S58
Urban Flood Monitoring
River levels, retention ponds and flood gates are monitored by different agencies, so the emergency centre lacks one live view when a storm arrives.
Tìm hiểu thêm →S59
City IoT Edge Gateway
Each city department buys its own sensors and cloud, so the same street carries several networks and data cannot be shared between services.
Tìm hiểu thêm →S60
Smart City Command Platform
The operations centre has screens for lighting, water, traffic and buildings, but each is a separate system, so incidents that cross departments are handled by phone.
Tìm hiểu thêm →
07Transportation & Infrastructure
S61–S70S61
Metro Station BMS Integration
Station ventilation, lighting, lifts, escalators and pumps come from different packages, and the station control room has no single view during peak hours or incidents.
Tìm hiểu thêm →S62
Railway Facility Monitoring
Trackside equipment rooms, substations and station buildings along the line are unmanned, and their power, cooling and intrusion alarms reach maintenance crews late.
Tìm hiểu thêm →S63
Airport Facility Management
Terminal HVAC, lighting, boarding bridges, baggage systems and energy meters are run by separate contractors, so facility managers cannot see service impacts or energy per terminal area.
Tìm hiểu thêm →S64
Tunnel Ventilation Monitoring
Jet fans and CO / visibility sensors are controlled by a local PLC, but the traffic control centre does not see fan status, sensor trends or faults in time.
Tìm hiểu thêm →S65
Tunnel Lighting Monitoring
Tunnel entrance lighting runs at full stages regardless of outside luminance, wasting energy, and failed circuits are found only on night inspections.
Tìm hiểu thêm →S66
Bridge Environmental Monitoring
Wind, temperature and humidity on long bridges affect traffic restrictions and maintenance, but readings are collected from standalone loggers weeks later.
Tìm hiểu thêm →S67
Highway Facility Monitoring
Roadside cabinets for signs, lighting, pumps and toll equipment are spread over hundreds of kilometres, and power or door alarms are only found on patrol.
Tìm hiểu thêm →S68
Port Equipment Monitoring
Cranes, reefer points and shore power are controlled by PLCs from several suppliers, so the terminal cannot compare equipment availability or energy use across the quay.
Tìm hiểu thêm →S69
EV Bus Charging Infrastructure
Depot chargers, transformers and building loads share one grid connection, and without live data the depot risks peak charges or buses not charged by morning.
Tìm hiểu thêm →S70
Transportation IoT Edge Gateway
Stations, tunnels and roadside sites each need a small, rugged data point that speaks field protocols and reports securely to the central platform without a new RTU design per site.
Tìm hiểu thêm →
08Healthcare & Education
S71–S80S71
Hospital BMS Integration
Hospital wards, theatres, plant rooms and medical gas alarms are managed by different teams and systems, so engineering staff lack one view of conditions that affect patients.
Tìm hiểu thêm →S72
Operating Theatre Environmental Monitoring
Temperature, humidity and room pressure in theatres must stay within limits during surgery, but readings are shown only on the theatre panel and are not recorded for audit.
Tìm hiểu thêm →S73
Negative Pressure Room Monitoring
Isolation rooms depend on a pressure difference that can be lost when a door is left open or a fan fails, and staff outside the room are not told.
Tìm hiểu thêm →S74
Medical Gas Monitoring
Oxygen, vacuum and medical air alarm panels sound locally on each ward, and engineering finds out about a pressure drop from a nurse’s phone call.
Tìm hiểu thêm →S75
Pharmaceutical Cold Chain Monitoring
Vaccine and drug fridges are checked twice a day by hand, so an excursion overnight is found in the morning and stock may have to be discarded without a record of how long it lasted.
Tìm hiểu thêm →S76
Hospital Energy Management
A hospital runs 24/7 with high HVAC and steam loads, but energy is known only from monthly bills, so savings projects cannot be targeted or verified.
Tìm hiểu thêm →S77
Smart Campus BMS
A campus has buildings from several decades with different controllers, so heating and cooling run to fixed schedules even in empty lecture halls during holidays.
Tìm hiểu thêm →S78
Classroom IAQ Monitoring
CO2 in full classrooms rises quickly and affects concentration, but schools have no sensors and parents ask for evidence that rooms are ventilated.
Tìm hiểu thêm →S79
Laboratory Environmental Monitoring
Labs need stable temperature, humidity and pressure, working fume hoods and alarms on freezers, but each device alarms locally and records are kept on paper.
Tìm hiểu thêm →S80
Campus Energy Monitoring
Faculties share utility bills with no way to see who uses what, so there is no incentive to save and sustainability commitments cannot be reported per building.
Tìm hiểu thêm →
09Hospitality, Retail & Commercial
S81–S90S81
Hotel BMS Integration
Hotel plant, lighting, lifts and guest-room systems come from different vendors, so engineering cannot link occupancy to HVAC or see faults before guests complain.
Tìm hiểu thêm →S82
Guest Room Automation Integration
Room control units manage lights, curtains and fan coils, but the front office and engineering cannot see room status or set unsold rooms to energy-saving mode.
Tìm hiểu thêm →S83
Hotel HVAC Energy Management
HVAC is the largest energy use in a hotel, yet chiller plant, VRF and room units are not metered or trended, so savings depend on staff remembering to switch things off.
Tìm hiểu thêm →S84
Shopping Mall BMS
Common-area HVAC, lighting, escalators and car park ventilation run on separate controls, and mall management cannot match operation to trading hours or footfall.
Tìm hiểu thêm →S85
Retail Chain Energy Monitoring
Hundreds of stores have similar equipment but very different bills, and head office cannot tell which store wastes energy because there is no data between invoices.
Tìm hiểu thêm →S86
Supermarket Refrigeration Monitoring
A failed display case or compressor rack overnight means discarded stock and food-safety risk, but case controllers only alarm on their own display.
Tìm hiểu thêm →S87
Restaurant Cold Storage Monitoring
Kitchen staff write fridge temperatures on a paper sheet twice a day, so failures at night are missed and inspectors see records that are hard to trust.
Tìm hiểu thêm →S88
Smart Office Automation
Meeting rooms are cooled and lit whether booked or not, and occupants have no simple way to control their space or see its air quality.
Tìm hiểu thêm →S89
Tenant Utility Billing
Tenant bills depend on monthly manual reads across several meter brands, finance cannot reconcile them against the main incomer, and disputes take weeks to settle.
Tìm hiểu thêm →S90
Multi-site Facility Management
A portfolio of stores or buildings is maintained reactively by local contractors, and the facility team has no remote view of equipment status, alarms or energy across sites.
Tìm hiểu thêm →
10Logistics, Agriculture & Distributed Sites
S91–S100S91
Cold Storage Monitoring
Cold rooms hold high-value stock, but refrigeration controllers alarm only locally and temperature records for customers are exported by hand.
Tìm hiểu thêm →S92
Cold Chain Environmental Monitoring
Goods pass through docks, cross-dock areas and depots where temperature is not recorded, so a customer claim cannot be traced to the link where the excursion happened.
Tìm hiểu thêm →S93
Warehouse Environmental Monitoring
Temperature- and humidity-sensitive goods are stored in large halls with a few thermostats, so hot spots under the roof and damp corners are not detected.
Tìm hiểu thêm →S94
Warehouse Energy Management
Lighting, dock doors, forklift charging and refrigeration drive the warehouse bill, but none of them is metered separately, so savings cannot be targeted.
Tìm hiểu thêm →S95
Reefer Container Monitoring
Reefer stacks in a yard are checked by walking the rows, so a tripped plug or an alarm on one container can go unnoticed for hours.
Tìm hiểu thêm →S96
Smart Greenhouse Monitoring
Greenhouse climate controllers regulate vents, screens and heating, but growers cannot see conditions remotely or compare houses, and alarms are missed at night.
Tìm hiểu thêm →S97
Smart Irrigation
Irrigation runs on timers regardless of soil moisture or rain, wasting water in some zones and under-watering others, and pump faults are found by crop damage.
Tìm hiểu thêm →S98
Agriculture Environmental Monitoring
Farms and livestock houses cover large areas without power or network at every point, so temperature, humidity, gas and soil data are collected by hand, if at all.
Tìm hiểu thêm →S99
Grain Silo Monitoring
Grain heats up from the inside, and hand-held checks at the silo top miss hot spots until spoilage has started; aeration fans run on guesswork.
Tìm hiểu thêm →S100
Remote Site Monitoring
Telecom shelters, pumping points and remote cabinets have no staff and often no fixed network, so a power failure, intrusion or high temperature is discovered on the next scheduled visit.
Tìm hiểu thêm →