Logistics, Agriculture & Distributed SitesS93

Warehouse Environmental Monitoring

Bài toán

Temperature- and humidity-sensitive goods are stored in large halls with a few thermostats, so hot spots under the roof and damp corners are not detected.

Tổng quan giải pháp

MILESGO gateways collect data from temperature and humidity sensors, LoRaWAN wireless sensors, air handling units (AHU), door, intrusion and cabinet-open contacts over LoRaWAN / Modbus RTU, and deliver it to a cloud platform (MQTT), the BMS, SMS, email and messaging alarms as MQTT / BACnet/IP. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.

Typical scope

temperature and humidity sensors
LoRaWAN wireless sensors
air handling units (AHU)
door, intrusion and cabinet-open contacts

Protocol path

LoRaWAN / Modbus RTU → MQTT / BACnet/IP

Implementation checklist for the project manager

Run a LoRaWAN coverage survey and pick the regional band (EU868 / US915 / AU915 / AS923 / KR920 / CN470) before ordering.
Agree sensor positions (height, airflow, distance from doors and diffusers) so readings are representative.
Keep sensor calibration certificates on file and plan recalibration intervals.
Agree data retention and the report format needed for audits with the quality team at the start.
Define an alarm matrix (priority, recipient, escalation) and test every alarm end to end at SAT.
Fix a site / asset naming convention before the first site so data from all sites can be compared.

Project deliverables

Signed point table and protocol mapping
Gateway configuration files and backups
IP address plan and network drawing
FAT and SAT test records
As-built documentation and operator training

Kiến trúc hệ thống

Field layer: temperature and humidity sensors, LoRaWAN wireless sensors, air handling units (AHU), door, intrusion and cabinet-open contacts, connected over LoRaWAN / Modbus RTU. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: a cloud platform (MQTT), the BMS, SMS, email and messaging alarms, which receives the data as MQTT / BACnet/IP. Remote access for maintenance runs over VPN rather than open internet ports.

Thành phần hệ thống

Field devices: temperature and humidity sensors, LoRaWAN wireless sensors, air handling units (AHU), door, intrusion and cabinet-open contacts
Edge / integration: MILESGO protocol gateways and edge controllers
Upper systems: a cloud platform (MQTT), the BMS, SMS, email and messaging alarms (MQTT / BACnet/IP)
Tools and commissioning: Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools

Năng lực phần mềm và AI

Anomaly detection on trend dataTrong lộ trình

Các bước triển khai

1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.

Giá trị cho khách hàng

Abnormal conditions seen early, before they become failures
Timestamped records for compliance and reporting
Reliable trend data for optimisation and fault diagnosis
Data ready for cloud platforms and analytics

Các giải pháp khác trong Logistics, Agriculture & Distributed Sites

Hãy cho chúng tôi biết về dự án của bạn

Gửi giao thức, số điểm dữ liệu và hệ thống đích. Một nhóm kinh doanh và kỹ thuật sẽ xem xét mọi yêu cầu.

Trao đổi về dự án