MILESGO
Yêu cầu báo giá

Transportation & InfrastructureS66

Bridge Environmental Monitoring

Bài toán

Wind, temperature and humidity on long bridges affect traffic restrictions and maintenance, but readings are collected from standalone loggers weeks later.

Tổng quan giải pháp

MILESGO gateways collect data from wind, temperature and humidity sensors on structures, weather stations, 4–20 mA / 0–10 V transmitters, solar power and battery cabinets at remote sites over Modbus RTU / LoRaWAN, and deliver it to SCADA, a cloud platform (MQTT), SMS, email and messaging alarms as MQTT / OPC UA. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.

Typical scope

  • wind, temperature and humidity sensors on structures
  • weather stations
  • 4–20 mA / 0–10 V transmitters
  • solar power and battery cabinets at remote sites

Protocol path

Modbus RTU / LoRaWAN → MQTT / OPC UA

Implementation checklist for the project manager

  • Outdoor sites need a weatherproof, ventilated enclosure with surge protection; the gateways are panel-mount devices (working range -20 °C to +70 °C).
  • Check 4G signal and the SIM data plan at every site before committing to cellular backhaul.
  • Keep sensor calibration certificates on file and plan recalibration intervals.
  • RS-485: shielded twisted pair, daisy-chain topology, termination at both ends, up to 32 nodes per segment without a repeater.
  • Confirm local storage so data survives network outages, and define the retention period.
  • Define an alarm matrix (priority, recipient, escalation) and test every alarm end to end at SAT.

Project deliverables

  • Signed point table and protocol mapping
  • Gateway configuration files and backups
  • IP address plan and network drawing
  • FAT and SAT test records
  • As-built documentation and operator training

Kiến trúc hệ thống

Field layer: wind, temperature and humidity sensors on structures, weather stations, 4–20 mA / 0–10 V transmitters, solar power and battery cabinets at remote sites, connected over Modbus RTU / LoRaWAN. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: SCADA, a cloud platform (MQTT), SMS, email and messaging alarms, which receives the data as MQTT / OPC UA. Remote access for maintenance runs over VPN rather than open internet ports.

Thành phần hệ thống

Field devices
wind, temperature and humidity sensors on structures, weather stations, 4–20 mA / 0–10 V transmitters, solar power and battery cabinets at remote sites
Edge / integration
MILESGO protocol gateways and edge controllers
Upper systems
SCADA, a cloud platform (MQTT), SMS, email and messaging alarms (MQTT / OPC UA)
Tools and commissioning
Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools

Năng lực phần mềm và AI

  • Anomaly detection on trend dataTrong lộ trình
  • Load and consumption forecastingTrong lộ trình

Các bước triển khai

  1. 1

    Site survey and point list

    Inventory devices, protocols, register maps, panel space, power and network paths.

  2. 2

    Design and point table sign-off

    Map every point to the target protocol and system; agree it with the client and the upper-system contractor.

  3. 3

    Configuration and FAT

    Build the gateway configuration off site, simulate it and test against the signed point table.

  4. 4

    Installation and wiring

    Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.

  5. 5

    SAT and alarm tests

    Verify values against local readings, test every alarm and command end to end.

  6. 6

    Handover and support

    Hand over configuration backups, point table and as-built documents; train operators.

Giá trị cho khách hàng

  • Unattended sites supervised without permanent staff
  • Abnormal conditions seen early, before they become failures
  • Reliable trend data for optimisation and fault diagnosis
  • Data kept locally during network outages

Các giải pháp khác trong Transportation & Infrastructure

Hãy cho chúng tôi biết về dự án của bạn

Gửi giao thức, số điểm dữ liệu và hệ thống đích. Một nhóm kinh doanh và kỹ thuật sẽ xem xét mọi yêu cầu.

Trao đổi về dự án