Classroom IAQ Monitoring
Bài toán
CO2 in full classrooms rises quickly and affects concentration, but schools have no sensors and parents ask for evidence that rooms are ventilated.
Tổng quan giải pháp
MILESGO gateways collect data from indoor air quality sensors (CO2, PM2.5, TVOC, T/RH), CO2 sensors, LoRaWAN wireless sensors over LoRaWAN / Modbus RTU, and deliver it to a cloud platform (MQTT), large-screen dashboards (HDMI), the BMS as MQTT / BACnet/IP. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.
Typical scope
- indoor air quality sensors (CO2, PM2.5, TVOC, T/RH)
- CO2 sensors
- LoRaWAN wireless sensors
Protocol path
LoRaWAN / Modbus RTU → MQTT / BACnet/IP
Implementation checklist for the project manager
- Run a LoRaWAN coverage survey and pick the regional band (EU868 / US915 / AU915 / AS923 / KR920 / CN470) before ordering.
- Agree sensor positions (height, airflow, distance from doors and diffusers) so readings are representative.
- Keep sensor calibration certificates on file and plan recalibration intervals.
- Fix a site / asset naming convention before the first site so data from all sites can be compared.
- Roll out in phases: pilot one site or area, confirm data quality, then replicate.
- List dashboard users and roles, and configure user permissions accordingly.
Project deliverables
- Signed point table and protocol mapping
- Gateway configuration files and backups
- IP address plan and network drawing
- FAT and SAT test records
- As-built documentation and operator training
Kiến trúc hệ thống
Field layer: indoor air quality sensors (CO2, PM2.5, TVOC, T/RH), CO2 sensors, LoRaWAN wireless sensors, connected over LoRaWAN / Modbus RTU. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: a cloud platform (MQTT), large-screen dashboards (HDMI), the BMS, which receives the data as MQTT / BACnet/IP. Remote access for maintenance runs over VPN rather than open internet ports.
Thành phần hệ thống
- Field devices
- indoor air quality sensors (CO2, PM2.5, TVOC, T/RH), CO2 sensors, LoRaWAN wireless sensors
- Edge / integration
- MILESGO protocol gateways and edge controllers
- Upper systems
- a cloud platform (MQTT), large-screen dashboards (HDMI), the BMS (MQTT / BACnet/IP)
- Tools and commissioning
- Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools
Năng lực phần mềm và AI
- Automatic report drafting from collected dataTrong lộ trình
Các bước triển khai
- 1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
- 2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
- 3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
- 4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
- 5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
- 6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.
Giá trị cho khách hàng
- Reliable trend data for optimisation and fault diagnosis
- Timestamped records for compliance and reporting
- Data ready for cloud platforms and analytics
- Abnormal conditions seen early, before they become failures
Các giải pháp khác trong Healthcare & Education
Hãy cho chúng tôi biết về dự án của bạn
Gửi giao thức, số điểm dữ liệu và hệ thống đích. Một nhóm kinh doanh và kỹ thuật sẽ xem xét mọi yêu cầu.
Trao đổi về dự án