Smart Campus BMS
Sorun
A campus has buildings from several decades with different controllers, so heating and cooling run to fixed schedules even in empty lecture halls during holidays.
Çözüme genel bakış
MILESGO gateways collect data from air handling units (AHU), fan coil units (FCU), VRV / VRF air conditioning systems, electricity meters, occupancy and people-counting sensors, KNX lighting actuators and panels over BACnet MS/TP / Modbus RTU / KNX / BACnet/IP, and deliver it to the BMS, a cloud platform (MQTT), WEB HMI panels as BACnet/IP / MQTT. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.
Typical scope
- air handling units (AHU)
- fan coil units (FCU)
- VRV / VRF air conditioning systems
- electricity meters
- occupancy and people-counting sensors
- KNX lighting actuators and panels
Protocol path
BACnet MS/TP / Modbus RTU / KNX / BACnet/IP → BACnet/IP / MQTT
Implementation checklist for the project manager
- Daikin VRV systems connect through the HBS converter; for other brands confirm the manufacturer’s gateway or interface.
- Agree BACnet device instances, network numbers and BBMD with the BMS contractor to avoid conflicts.
- Standardise one configuration template per equipment type so further sites are copied, not rebuilt.
- Fix a site / asset naming convention before the first site so data from all sites can be compared.
- List dashboard users and roles, and configure user permissions accordingly.
- Roll out in phases: pilot one site or area, confirm data quality, then replicate.
Project deliverables
- Signed point table and protocol mapping
- Gateway configuration files and backups
- IP address plan and network drawing
- FAT and SAT test records
- As-built documentation and operator training
Sistem mimarisi
Field layer: air handling units (AHU), fan coil units (FCU), VRV / VRF air conditioning systems, electricity meters, occupancy and people-counting sensors, KNX lighting actuators and panels, connected over BACnet MS/TP / Modbus RTU / KNX / BACnet/IP. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: the BMS, a cloud platform (MQTT), WEB HMI panels, which receives the data as BACnet/IP / MQTT. Remote access for maintenance runs over VPN rather than open internet ports.
Sistem bileşenleri
- Field devices
- air handling units (AHU), fan coil units (FCU), VRV / VRF air conditioning systems, electricity meters, occupancy and people-counting sensors, KNX lighting actuators and panels
- Edge / integration
- MILESGO protocol gateways and edge controllers
- Upper systems
- the BMS, a cloud platform (MQTT), WEB HMI panels (BACnet/IP / MQTT)
- Tools and commissioning
- Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools
Yazılım ve yapay zekâ yetenekleri
- Load and consumption forecastingYol haritasında
- Consumption baseline and deviation alertsYol haritasında
Teslimat adımları
- 1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
- 2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
- 3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
- 4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
- 5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
- 6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.
Müşteriye sağlanan değer
- One view of all subsystems instead of separate vendor consoles
- Consumption visible by area, system and time period
- Configuration templates reused across sites
- Remote diagnosis and fewer site visits
Healthcare & Education alanındaki diğer çözümler
Projenizi bize anlatın
Protokolleri, nokta sayısını ve hedef sistemi gönderin. Satış ve mühendislik ekibi her başvuruyu birlikte inceler.
Projenizi Görüşelim