Classroom IAQ Monitoring

Sorun

CO2 in full classrooms rises quickly and affects concentration, but schools have no sensors and parents ask for evidence that rooms are ventilated.

Çözüme genel bakış

MILESGO gateways collect data from indoor air quality sensors (CO2, PM2.5, TVOC, T/RH), CO2 sensors, LoRaWAN wireless sensors over LoRaWAN / Modbus RTU, and deliver it to a cloud platform (MQTT), large-screen dashboards (HDMI), the BMS as MQTT / BACnet/IP. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.

Typical scope

indoor air quality sensors (CO2, PM2.5, TVOC, T/RH)
CO2 sensors
LoRaWAN wireless sensors

Protocol path

LoRaWAN / Modbus RTU → MQTT / BACnet/IP

Implementation checklist for the project manager

Run a LoRaWAN coverage survey and pick the regional band (EU868 / US915 / AU915 / AS923 / KR920 / CN470) before ordering.
Agree sensor positions (height, airflow, distance from doors and diffusers) so readings are representative.
Keep sensor calibration certificates on file and plan recalibration intervals.
Fix a site / asset naming convention before the first site so data from all sites can be compared.
Roll out in phases: pilot one site or area, confirm data quality, then replicate.
List dashboard users and roles, and configure user permissions accordingly.

Project deliverables

Signed point table and protocol mapping
Gateway configuration files and backups
IP address plan and network drawing
FAT and SAT test records
As-built documentation and operator training

Sistem mimarisi

Field layer: indoor air quality sensors (CO2, PM2.5, TVOC, T/RH), CO2 sensors, LoRaWAN wireless sensors, connected over LoRaWAN / Modbus RTU. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: a cloud platform (MQTT), large-screen dashboards (HDMI), the BMS, which receives the data as MQTT / BACnet/IP. Remote access for maintenance runs over VPN rather than open internet ports.

Sistem bileşenleri

Field devices: indoor air quality sensors (CO2, PM2.5, TVOC, T/RH), CO2 sensors, LoRaWAN wireless sensors
Edge / integration: MILESGO protocol gateways and edge controllers
Upper systems: a cloud platform (MQTT), large-screen dashboards (HDMI), the BMS (MQTT / BACnet/IP)
Tools and commissioning: Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools

Yazılım ve yapay zekâ yetenekleri

Automatic report drafting from collected dataYol haritasında

Teslimat adımları

1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.

Müşteriye sağlanan değer

Reliable trend data for optimisation and fault diagnosis
Timestamped records for compliance and reporting
Data ready for cloud platforms and analytics
Abnormal conditions seen early, before they become failures

Healthcare & Education alanındaki diğer çözümler

Projenizi bize anlatın

Protokolleri, nokta sayısını ve hedef sistemi gönderin. Satış ve mühendislik ekibi her başvuruyu birlikte inceler.

Projenizi Görüşelim