Data Center Unified Alarm Platform

Problem

Power, cooling, security and IT alarms arrive through SNMP traps, BMS pop-ups and vendor emails, so the on-call engineer misses the one alarm that matters in the noise.

Opis rozwiązania

MILESGO gateways collect data from UPS units, intelligent PDUs, CRAC / CRAH precision air conditioners, water leak detection controllers, access control systems, generator controllers over SNMP / Modbus TCP / BACnet/IP, and deliver it to the NMS (SNMP manager), the DCIM, SMS, email and messaging alarms, third-party platforms (HTTP API) as SNMP / MQTT / OPC UA. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.

Typical scope

UPS units
intelligent PDUs
CRAC / CRAH precision air conditioners
water leak detection controllers
access control systems
generator controllers

Protocol path

SNMP / Modbus TCP / BACnet/IP → SNMP / MQTT / OPC UA

Implementation checklist for the project manager

Define an alarm matrix (priority, recipient, escalation) and test every alarm end to end at SAT.
Collect MIB files, SNMP versions and v3 credentials for every UPS / PDU / cooling model.
List dashboard users and roles, and configure user permissions accordingly.
Keep OT networks segregated and use VPN for remote access instead of opening ports to the internet.
Configure NTP so trends, alarms and meter readings carry consistent timestamps.
Hand over configuration backups, point table, IP plan and as-built drawings, with a short operator training.

Project deliverables

Signed point table and protocol mapping
Gateway configuration files and backups
IP address plan and network drawing
FAT and SAT test records
As-built documentation and operator training

Architektura systemu

Field layer: UPS units, intelligent PDUs, CRAC / CRAH precision air conditioners, water leak detection controllers, access control systems, generator controllers, connected over SNMP / Modbus TCP / BACnet/IP. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: the NMS (SNMP manager), the DCIM, SMS, email and messaging alarms, third-party platforms (HTTP API), which receives the data as SNMP / MQTT / OPC UA. Remote access for maintenance runs over VPN rather than open internet ports.

Skład systemu

Field devices: UPS units, intelligent PDUs, CRAC / CRAH precision air conditioners, water leak detection controllers, access control systems, generator controllers
Edge / integration: MILESGO protocol gateways and edge controllers
Upper systems: the NMS (SNMP manager), the DCIM, SMS, email and messaging alarms, third-party platforms (HTTP API) (SNMP / MQTT / OPC UA)
Tools and commissioning: Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools

Możliwości oprogramowania i AI

Alarm noise reduction and root-cause groupingW planach
Configuration screens generated from a natural-language description (SCADA gateway AI assistant)Pilotaż

Etapy wdrożenia

1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.

Korzyści dla klienta

One view of all subsystems instead of separate vendor consoles
Alarms reach the right person by SMS, email or messaging apps
Timestamped records for compliance and reporting
Open interfaces (BACnet, Modbus, OPC UA, MQTT, HTTP) avoid lock-in to one vendor

Więcej rozwiązań w obszarze Data Center

Opowiedz nam o swoim projekcie

Prześlij protokoły, liczbę punktów i system docelowy. Każde zgłoszenie analizuje zespół handlowo-inżynierski.

Omów swój projekt