Soluzioni
100 soluzioni pronte per l'implementazione in dieci ambiti, ciascuna con il problema, il percorso di protocollo, la serie di prodotti consigliata e una checklist per il project manager.
10 soluzioni
01Smart Building
S01–S10S01
Building Management System Integration
Chillers, AHUs, meters, lighting and lifts arrive with different protocols from different vendors, so the BMS only sees the subsystems someone paid to integrate and every new package needs another custom driver.
Scopri di più →S02
HVAC Central Monitoring
AHUs, fan coils, VAV boxes, chillers, pumps and cooling towers are monitored on separate panels, so operators find faults by complaint rather than by alarm.
Scopri di più →S03
Chiller Plant Optimization
Chillers, chilled and condenser water pumps and cooling towers run on fixed schedules with no measured cooling output, so nobody can tell how efficiently the plant performs or where to start optimising.
Scopri di più →S04
AHU Smart Control
Old AHU controllers cannot vary fan speed or fresh air by CO2, and replacing them with a proprietary controller locks the building into one vendor.
Scopri di più →S05
Indoor Air Quality Monitoring
Occupants and certification schemes ask for CO2, PM2.5, TVOC and humidity data, but there are no sensors on the BMS, and cabling every floor for them is costly in an occupied building.
Scopri di più →S06
Smart Lighting Integration
KNX, DALI and Modbus lighting systems each have their own software, so the BMS cannot schedule lighting, see failures or link lighting to occupancy.
Scopri di più →S07
Building Energy Monitoring
Electricity, water, gas and BTU meters are read by hand or not at all, so energy reports are late, incomplete and impossible to trace back to a system or floor.
Scopri di più →S08
Elevator & Escalator Monitoring
Lift and escalator status sits in the vendor’s own system, so the control room learns about a trapped passenger or a stopped escalator by phone.
Scopri di più →S09
Multi-system BMS Gateway
HVAC, lighting, access control, energy and fire systems each report to a different workstation, and operators cannot correlate an event across them.
Scopri di più →S10
Building Command Center
Facility teams run several buildings from spreadsheets and vendor portals, with no common dashboard, alarm list or API for the tenant and management systems.
Scopri di più →