MILESGO IIoT Pte. Ltd.
Connetti i dispositivi. Integra i dati. Abilita l'intelligenza.
MILESGO è una piattaforma globale di digitalizzazione industriale che integra dispositivi, software, IA e servizi di system integration attorno alle tecnologie Sunfull di comunicazione industriale, conversione di protocollo ed edge computing.
Tecnologia di base Sunfull
Dal dispositivo di campo all'applicazione
Sensori, contatori, PLC e controllori raggiungono BMS, SCADA, MES e applicazioni cloud attraverso il nucleo di connettività Sunfull.
- 01
Livello dispositivi
Sensori, contatori, PLC, controllori, apparecchiature di terze parti
- 02
Livello connettività
Gateway di protocollo, LoRaWAN, I/O remoti, reti industriali
- 03
Livello edge
Logica locale, buffering, allarmi, mappatura dei punti, pre-elaborazione
- 04
Livello piattaforma
Gestione dispositivi, historian, dashboard, reportistica, API
- 05
Livello intelligenza
Diagnostica, previsione, consigli di ottimizzazione, strumenti per agenti
- 06
Livello applicativo
BMS, SCADA, MES, DCIM, ERP e applicazioni del cliente
Categorie di prodotto
Hardware e software di connettività industriale, organizzati in base alla funzione del dispositivo.
Web HMI Panels
Capacitive touch panels running local and cloud configuration.
Industrial Gateways
Protocol conversion between building, industrial and IT systems.
Edge Controllers
Local logic, buffering and alarming close to the equipment.
Energy Management
Metering, tariff periods and consumption reporting.
Meters and Sensors
Measurement devices that also act as protocol gateways.
LoRaWAN
Gateways and sensors for long-range, low-power monitoring.
Software Platforms
Configuration, device management and data services.
Networking and Converters
Switches, routers, repeaters and physical-layer converters.
Soluzioni per settore
Costruite attorno al problema del cliente, non a un elenco di codici prodotto.
S01 Building Management System Integration
Chillers, AHUs, meters, lighting and lifts arrive with different protocols from different vendors, so the BMS only sees the subsystems someone paid to integrate and every new package needs another custom driver.
S11 Smart Electricity Metering
Hundreds of electricity meters from several brands are spread across panels and sites, read monthly by hand, with no interval data for demand analysis.
S21 DCIM Data Integration
The DCIM has an SNMP interface, but half of the power and cooling plant speaks Modbus or BACnet, so its dashboards are incomplete and capacity planning relies on estimates.
S31 PLC Multi-Protocol Gateway
Siemens, Schneider, Mitsubishi and Rockwell PLCs on the same site cannot exchange data without extra programming in each controller, and every interlock between lines becomes a project.
S41 Water Pump Station Monitoring
Pump stations are spread across the network and visited on rounds, so a tripped pump, a high level or a power failure is reported by residents before the operator knows.
S51 Smart Street Lighting
Street lighting cabinets switch on timers or photocells, failed lamps are found by patrols, and energy is billed on estimates rather than measurement.
I protocolli che supportiamo
Ogni protocollo dichiarato in una pagina prodotto indica versione, ruolo del dispositivo e limiti di connessione.
- BACnet/IP
- BACnet MS/TP
- BACnet/SC
- DL/T 645
- DyNet
- EtherNet/IP
- HART
- IEC 60870-5-104
- IEC 61850
- KNX
- LoRaWAN
- M-Bus
- Modbus RTU
- Modbus TCP
- MQTT
- OPC UA
- OPC XML-DA
- PROFINET
- S7
- SNMP
Raccontaci il tuo progetto
Indica i protocolli, il numero di punti e il sistema di destinazione. Un team commerciale e tecnico esamina ogni richiesta.