UPS Monitoring

Sorun

UPS units from different generations report over SNMP or Modbus to separate consoles, so load, autonomy and battery alarms are not seen together by the BMS or cloud.

Çözüme genel bakış

MILESGO gateways collect data from UPS units, battery monitoring units over SNMP / Modbus RTU / Modbus TCP, and deliver it to the BMS, a cloud platform (MQTT), the NMS (SNMP manager) as BACnet/IP / MQTT / SNMP. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.

Typical scope

UPS units
battery monitoring units

Protocol path

SNMP / Modbus RTU / Modbus TCP → BACnet/IP / MQTT / SNMP

Implementation checklist for the project manager

Collect MIB files, SNMP versions and v3 credentials for every UPS / PDU / cooling model.
Collect register maps and protocol documents from every equipment vendor early; a missing map is the most common delay.
Agree BACnet device instances, network numbers and BBMD with the BMS contractor to avoid conflicts.
Define an alarm matrix (priority, recipient, escalation) and test every alarm end to end at SAT.
Keep OT networks segregated and use VPN for remote access instead of opening ports to the internet.
Hand over configuration backups, point table, IP plan and as-built drawings, with a short operator training.

Project deliverables

Signed point table and protocol mapping
Gateway configuration files and backups
IP address plan and network drawing
FAT and SAT test records
As-built documentation and operator training

Sistem mimarisi

Field layer: UPS units, battery monitoring units, connected over SNMP / Modbus RTU / Modbus TCP. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: the BMS, a cloud platform (MQTT), the NMS (SNMP manager), which receives the data as BACnet/IP / MQTT / SNMP. Remote access for maintenance runs over VPN rather than open internet ports.

Sistem bileşenleri

Field devices: UPS units, battery monitoring units
Edge / integration: MILESGO protocol gateways and edge controllers
Upper systems: the BMS, a cloud platform (MQTT), the NMS (SNMP manager) (BACnet/IP / MQTT / SNMP)
Tools and commissioning: Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools

Yazılım ve yapay zekâ yetenekleri

Predictive maintenance indicators from equipment trendsYol haritasında

Teslimat adımları

1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.

Müşteriye sağlanan değer

One view of all subsystems instead of separate vendor consoles
Alarms reach the right person by SMS, email or messaging apps
Abnormal conditions seen early, before they become failures
Open interfaces (BACnet, Modbus, OPC UA, MQTT, HTTP) avoid lock-in to one vendor

Data Center alanındaki diğer çözümler

Projenizi bize anlatın

Protokolleri, nokta sayısını ve hedef sistemi gönderin. Satış ve mühendislik ekibi her başvuruyu birlikte inceler.

Projenizi Görüşelim