Carbon & Energy Dashboard
ปัญหา
Sustainability reports are compiled once a year from invoices, so management cannot see progress toward carbon targets or which site is driving emissions.
ภาพรวมโซลูชัน
MILESGO gateways collect data from electricity meters, gas meters, water meters, BTU / heat meters over Modbus TCP / M-Bus / BACnet/IP / MQTT, and deliver it to a cloud platform (MQTT), large-screen dashboards (HDMI), the energy management system, third-party platforms (HTTP API) as MQTT / OPC UA. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.
Typical scope
- electricity meters
- gas meters
- water meters
- BTU / heat meters
Protocol path
Modbus TCP / M-Bus / BACnet/IP / MQTT → MQTT / OPC UA
Implementation checklist for the project manager
- Agree emission factors and reporting boundaries with the sustainability team; the platform applies the factors you provide.
- Fix a site / asset naming convention before the first site so data from all sites can be compared.
- Record CT ratios, meter IDs and multipliers in the point table; wrong multipliers are the usual cause of billing errors.
- Agree KPI definitions (for example OEE components or kWh per unit) with operations before building dashboards.
- Roll out in phases: pilot one site or area, confirm data quality, then replicate.
- List dashboard users and roles, and configure user permissions accordingly.
Project deliverables
- Signed point table and protocol mapping
- Gateway configuration files and backups
- IP address plan and network drawing
- FAT and SAT test records
- As-built documentation and operator training
สถาปัตยกรรมระบบ
Field layer: electricity meters, gas meters, water meters, BTU / heat meters, connected over Modbus TCP / M-Bus / BACnet/IP / MQTT. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: a cloud platform (MQTT), large-screen dashboards (HDMI), the energy management system, third-party platforms (HTTP API), which receives the data as MQTT / OPC UA. Remote access for maintenance runs over VPN rather than open internet ports.
องค์ประกอบของระบบ
- Field devices
- electricity meters, gas meters, water meters, BTU / heat meters
- Edge / integration
- MILESGO protocol gateways and edge controllers
- Upper systems
- a cloud platform (MQTT), large-screen dashboards (HDMI), the energy management system, third-party platforms (HTTP API) (MQTT / OPC UA)
- Tools and commissioning
- Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools
ความสามารถด้านซอฟต์แวร์และ AI
- Automatic report drafting from collected dataอยู่ในแผน
- Load and consumption forecastingอยู่ในแผน
ขั้นตอนการส่งมอบ
- 1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
- 2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
- 3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
- 4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
- 5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
- 6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.
คุณค่าสำหรับลูกค้า
- Consumption visible by area, system and time period
- Timestamped records for compliance and reporting
- Data ready for cloud platforms and analytics
- Configuration templates reused across sites
โซลูชันอื่นใน Energy & Power
บอกเราเกี่ยวกับโครงการของคุณ
ส่งโปรโตคอล จำนวนจุดข้อมูล และระบบปลายทางมาให้เรา ทีมฝ่ายขายและวิศวกรรมจะตรวจสอบทุกคำขอ
ปรึกษาโครงการของคุณ