Logistics, Agriculture & Distributed SitesS99
Grain Silo Monitoring
Masalahnya
Grain heats up from the inside, and hand-held checks at the silo top miss hot spots until spoilage has started; aeration fans run on guesswork.
Ikhtisar solusi
MILESGO gateways collect data from grain temperature cables and aeration fans, temperature and humidity sensors, PT100 / PT1000 temperature probes, electricity meters over Modbus RTU, and deliver it to a cloud platform (MQTT), WEB HMI panels, SMS, email and messaging alarms as MQTT / Modbus TCP. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.
Typical scope
- grain temperature cables and aeration fans
- temperature and humidity sensors
- PT100 / PT1000 temperature probes
- electricity meters
Protocol path
Modbus RTU → MQTT / Modbus TCP
Implementation checklist for the project manager
- Collect register maps and protocol documents from every equipment vendor early; a missing map is the most common delay.
- RS-485: shielded twisted pair, daisy-chain topology, termination at both ends, up to 32 nodes per segment without a repeater.
- Write the control sequence (start/stop order, interlocks, set-points, fallback on communication loss) and have it approved before programming.
- Define an alarm matrix (priority, recipient, escalation) and test every alarm end to end at SAT.
- Outdoor sites need a weatherproof, ventilated enclosure with surge protection; the gateways are panel-mount devices (working range -20 °C to +70 °C).
- Confirm local storage so data survives network outages, and define the retention period.
Project deliverables
- Signed point table and protocol mapping
- Gateway configuration files and backups
- IP address plan and network drawing
- FAT and SAT test records
- As-built documentation and operator training
Arsitektur sistem
Field layer: grain temperature cables and aeration fans, temperature and humidity sensors, PT100 / PT1000 temperature probes, electricity meters, connected over Modbus RTU. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: a cloud platform (MQTT), WEB HMI panels, SMS, email and messaging alarms, which receives the data as MQTT / Modbus TCP. Remote access for maintenance runs over VPN rather than open internet ports.
Komposisi sistem
- Field devices
- grain temperature cables and aeration fans, temperature and humidity sensors, PT100 / PT1000 temperature probes, electricity meters
- Edge / integration
- MILESGO protocol gateways and edge controllers
- Upper systems
- a cloud platform (MQTT), WEB HMI panels, SMS, email and messaging alarms (MQTT / Modbus TCP)
- Tools and commissioning
- Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools
Kemampuan perangkat lunak dan AI
- Anomaly detection on trend dataDalam rencana
Langkah pelaksanaan
- 1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
- 2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
- 3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
- 4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
- 5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
- 6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.
Nilai bagi pelanggan
- Abnormal conditions seen early, before they become failures
- Reliable trend data for optimisation and fault diagnosis
- Alarms reach the right person by SMS, email or messaging apps
- Unattended sites supervised without permanent staff
Solusi lain di Logistics, Agriculture & Distributed Sites
Ceritakan proyek Anda
Kirimkan protokol, jumlah titik, dan sistem target. Tim penjualan dan teknik meninjau setiap pengajuan.
Diskusikan Proyek Anda