Smart Public Toilet Monitoring
Proje ekranları

Aviation service area smart restroom – live stall map and men's restroom air quality, customised with X2VIEW. 
Smart restroom management system – floor plan with stall status, water and power use, visitor counts and odour removal units, customised with X2VIEW. 
Smart restroom management system – stall availability, people flow and NH3/H2S environment monitoring, customised with X2VIEW.
Müşteri Sorunları
Geleneksel umumi tuvaletlerde temizlik genellikle sabit programlara ve manuel kontrollere dayanmaktadır. Bu nedenle yöneticiler gerçek kullanım yoğunluğunu ve ortam koşullarını zamanında takip etmekte zorlanır ve aşağıdaki sorunlarla karşılaşır:
- Temizliğin gerçek ihtiyaca göre planlanamaması: gerçek zamanlı ziyaretçi sayısı ve kullanım sıklığı verilerinin bulunmaması, yoğun saatlerde temizliğin yetersiz kalmasına, düşük yoğunluklu saatlerde ise gereksiz kontroller ve iş gücü kaybına yol açabilir.
- Kötü kokuların geç fark edilmesi: amonyak, hidrojen sülfür ve diğer kötü kokular çoğu zaman ancak kullanıcı şikâyetlerinden sonra fark edilir. Bu durum kullanıcı deneyimini ve tesisin yönetim imajını olumsuz etkiler.
- Kullanım durumunun gerçek zamanlı olarak görüntülenememesi: yöneticiler tuvaletlerin kullanım miktarını, yoğunluk seviyesini ve çalışma durumunu uzaktan takip edemez, bu nedenle sahadaki durum yeterince şeffaf değildir.
- Su kaçaklarının ve anormal su tüketiminin zamanında tespit edilememesi: gece veya personelin bulunmadığı zamanlarda meydana gelen sürekli su kaçakları zamanında fark edilmeyebilir ve su israfının yanı sıra ekipman ve tesislerde hasara neden olabilir.
- Çoklu lokasyon yönetiminde düşük verimlilik: havalimanları, alışveriş merkezleri, sanayi bölgeleri, turistik alanlar ve belediye projelerinde bulunan çok sayıda tuvaletin manuel olarak tek tek kontrol edilmesi gerekir. Bu durum işletme maliyetlerini artırır ve sorunlara müdahale süresini uzatır.
- Yönetim kararlarını destekleyecek verilerin yetersizliği: ziyaretçi yoğunluğu, çevresel koşullar ve su tüketimi hakkında yeterli veri olmadan kullanım alışkanlıklarını analiz etmek, temizlik sıklığını optimize etmek ve operasyon kalitesini değerlendirmek zordur.
Çözüme genel bakış
MILESGO gateways collect data from occupancy and people-counting sensors, ammonia / H2S odour sensors, water meters, LoRaWAN wireless sensors over LoRaWAN / Modbus RTU, and deliver it to the city IoT platform, a cloud platform (MQTT), SMS, email and messaging alarms as MQTT. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.
Typical scope
- occupancy and people-counting sensors
- ammonia / H2S odour sensors
- water meters
- LoRaWAN wireless sensors
Protocol path
LoRaWAN / Modbus RTU → MQTT
Implementation checklist for the project manager
- Run a LoRaWAN coverage survey and pick the regional band (EU868 / US915 / AU915 / AS923 / KR920 / CN470) before ordering.
- Agree sensor positions (height, airflow, distance from doors and diffusers) so readings are representative.
- Define an alarm matrix (priority, recipient, escalation) and test every alarm end to end at SAT.
- Fix a site / asset naming convention before the first site so data from all sites can be compared.
- Roll out in phases: pilot one site or area, confirm data quality, then replicate.
- Check 4G signal and the SIM data plan at every site before committing to cellular backhaul.
Project deliverables
- Signed point table and protocol mapping
- Gateway configuration files and backups
- IP address plan and network drawing
- FAT and SAT test records
- As-built documentation and operator training
Sistem mimarisi
Field layer: occupancy and people-counting sensors, ammonia / H2S odour sensors, water meters, LoRaWAN wireless sensors, connected over LoRaWAN / Modbus RTU. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: the city IoT platform, a cloud platform (MQTT), SMS, email and messaging alarms, which receives the data as MQTT. Remote access for maintenance runs over VPN rather than open internet ports.
Sistem bileşenleri
- Field devices
- occupancy and people-counting sensors, ammonia / H2S odour sensors, water meters, LoRaWAN wireless sensors
- Edge / integration
- MILESGO protocol gateways and edge controllers
- Upper systems
- the city IoT platform, a cloud platform (MQTT), SMS, email and messaging alarms (MQTT)
- Tools and commissioning
- Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools
Yazılım ve yapay zekâ yetenekleri
- Load and consumption forecastingYol haritasında
Teslimat adımları
- 1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
- 2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
- 3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
- 4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
- 5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
- 6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.
Müşteriye sağlanan değer
- Abnormal conditions seen early, before they become failures
- Alarms reach the right person by SMS, email or messaging apps
- Unattended sites supervised without permanent staff
- Data ready for cloud platforms and analytics
Smart City & Municipal alanındaki diğer çözümler
Projenizi bize anlatın
Protokolleri, nokta sayısını ve hedef sistemi gönderin. Satış ve mühendislik ekibi her başvuruyu birlikte inceler.
Projenizi Görüşelim