Hospitality, Retail & CommercialS83
Hotel HVAC Energy Management
ปัญหา
HVAC is the largest energy use in a hotel, yet chiller plant, VRF and room units are not metered or trended, so savings depend on staff remembering to switch things off.
ภาพรวมโซลูชัน
MILESGO gateways collect data from chillers, VRV / VRF air conditioning systems, fan coil units (FCU), BTU / heat meters, electricity meters over BACnet/IP / Modbus RTU / M-Bus, and deliver it to the energy management system, the BMS, large-screen dashboards (HDMI) as BACnet/IP / MQTT. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.
Typical scope
- chillers
- VRV / VRF air conditioning systems
- fan coil units (FCU)
- BTU / heat meters
- electricity meters
Protocol path
BACnet/IP / Modbus RTU / M-Bus → BACnet/IP / MQTT
Implementation checklist for the project manager
- Daikin VRV systems connect through the HBS converter; for other brands confirm the manufacturer’s gateway or interface.
- Record CT ratios, meter IDs and multipliers in the point table; wrong multipliers are the usual cause of billing errors.
- Write the control sequence (start/stop order, interlocks, set-points, fallback on communication loss) and have it approved before programming.
- Commission in read-only mode first; enable write / control points only after the client approves each one.
- Agree KPI definitions (for example OEE components or kWh per unit) with operations before building dashboards.
- Hand over configuration backups, point table, IP plan and as-built drawings, with a short operator training.
Project deliverables
- Signed point table and protocol mapping
- Gateway configuration files and backups
- IP address plan and network drawing
- FAT and SAT test records
- As-built documentation and operator training
สถาปัตยกรรมระบบ
Field layer: chillers, VRV / VRF air conditioning systems, fan coil units (FCU), BTU / heat meters, electricity meters, connected over BACnet/IP / Modbus RTU / M-Bus. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: the energy management system, the BMS, large-screen dashboards (HDMI), which receives the data as BACnet/IP / MQTT. Remote access for maintenance runs over VPN rather than open internet ports.
องค์ประกอบของระบบ
- Field devices
- chillers, VRV / VRF air conditioning systems, fan coil units (FCU), BTU / heat meters, electricity meters
- Edge / integration
- MILESGO protocol gateways and edge controllers
- Upper systems
- the energy management system, the BMS, large-screen dashboards (HDMI) (BACnet/IP / MQTT)
- Tools and commissioning
- Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools
ความสามารถด้านซอฟต์แวร์และ AI
- Consumption baseline and deviation alertsนำร่อง
- Load and consumption forecastingอยู่ในแผน
ขั้นตอนการส่งมอบ
- 1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
- 2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
- 3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
- 4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
- 5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
- 6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.
คุณค่าสำหรับลูกค้า
- Consumption visible by area, system and time period
- Reliable trend data for optimisation and fault diagnosis
- Consumption attributable by tenant, department or cost centre
- New equipment integrated by configuration, not custom driver development
โซลูชันอื่นใน Hospitality, Retail & Commercial
บอกเราเกี่ยวกับโครงการของคุณ
ส่งโปรโตคอล จำนวนจุดข้อมูล และระบบปลายทางมาให้เรา ทีมฝ่ายขายและวิศวกรรมจะตรวจสอบทุกคำขอ
ปรึกษาโครงการของคุณ