DCIM Data Integration

Masalahnya

The DCIM has an SNMP interface, but half of the power and cooling plant speaks Modbus or BACnet, so its dashboards are incomplete and capacity planning relies on estimates.

Ikhtisar solusi

MILESGO gateways collect data from UPS units, intelligent PDUs, CRAC / CRAH precision air conditioners, chillers, electricity meters, temperature and humidity sensors over Modbus RTU / Modbus TCP / BACnet/IP, and deliver it to the DCIM, the NMS (SNMP manager) as SNMP / OPC UA. Field equipment keeps its own protocol and control logic; integration is done by configuration and point mapping, not custom code.

Typical scope

UPS units
intelligent PDUs
CRAC / CRAH precision air conditioners
chillers
electricity meters
temperature and humidity sensors

Protocol path

Modbus RTU / Modbus TCP / BACnet/IP → SNMP / OPC UA

Implementation checklist for the project manager

Collect MIB files, SNMP versions and v3 credentials for every UPS / PDU / cooling model.
Collect register maps and protocol documents from every equipment vendor early; a missing map is the most common delay.
Size gateways by point count (256 / 512 / 1024 / 2048 tags per model) and by the number of RS-485 channels, leaving about 20% spare.
Build and simulate the configuration off site (FAT) before installation to shorten time on site.
Issue an IP address plan and VLAN / firewall rules with the client’s IT team before installation.
Define an alarm matrix (priority, recipient, escalation) and test every alarm end to end at SAT.
Hand over configuration backups, point table, IP plan and as-built drawings, with a short operator training.

Project deliverables

Signed point table and protocol mapping
Gateway configuration files and backups
IP address plan and network drawing
FAT and SAT test records
As-built documentation and operator training

Arsitektur sistem

Field layer: UPS units, intelligent PDUs, CRAC / CRAH precision air conditioners, chillers, electricity meters, temperature and humidity sensors, connected over Modbus RTU / Modbus TCP / BACnet/IP. Edge and integration layer: MILESGO protocol gateways and edge controllers, mounted on DIN rail in existing panels, polling each device, time-stamping values and buffering them locally. Upper layer: the DCIM, the NMS (SNMP manager), which receives the data as SNMP / OPC UA. Remote access for maintenance runs over VPN rather than open internet ports.

Komposisi sistem

Field devices: UPS units, intelligent PDUs, CRAC / CRAH precision air conditioners, chillers, electricity meters, temperature and humidity sensors
Edge / integration: MILESGO protocol gateways and edge controllers
Upper systems: the DCIM, the NMS (SNMP manager) (SNMP / OPC UA)
Tools and commissioning: Web-based configuration, point table import/export (Excel), off-site simulation and on-site diagnostic tools

Kemampuan perangkat lunak dan AI

Alarm noise reduction and root-cause groupingDalam rencana
Load and consumption forecastingDalam rencana

Langkah pelaksanaan

1
Site survey and point list
Inventory devices, protocols, register maps, panel space, power and network paths.
2
Design and point table sign-off
Map every point to the target protocol and system; agree it with the client and the upper-system contractor.
3
Configuration and FAT
Build the gateway configuration off site, simulate it and test against the signed point table.
4
Installation and wiring
Mount gateways on DIN rail, wire RS-485 / I/O / Ethernet, apply the IP plan.
5
SAT and alarm tests
Verify values against local readings, test every alarm and command end to end.
6
Handover and support
Hand over configuration backups, point table and as-built documents; train operators.

Nilai bagi pelanggan

One view of all subsystems instead of separate vendor consoles
Monitoring added without changing existing control programs
Reliable trend data for optimisation and fault diagnosis
Open interfaces (BACnet, Modbus, OPC UA, MQTT, HTTP) avoid lock-in to one vendor

Solusi lain di Data Center

Ceritakan proyek Anda

Kirimkan protokol, jumlah titik, dan sistem target. Tim penjualan dan teknik meninjau setiap pengajuan.

Diskusikan Proyek Anda